24V Brushless DC Motor Driver BLD-120A 12-30VDC 120W BLDC Motor controller
HALL angle: 120°/240°
Multi-speed regulation modes
Maximum input voltage: 30V
Strong over-current self-protection function
Smooth torque output within speed range of 0-20000rpm
High efficient, slowly temperature rise and compact size
Hall drive current
Hall signal votage
Applicable motor speed
Avoid dust, oil stain and corrosive gas
40-90%RH (no condensation)
Natural cooling or forced cooling
Driver interface and motor connection
1.External potentiometer; 2.Input analog signal; 3.PWM pulse width.
Common port (0V reference level)
Motor rotation direction control(CW/CCW). High level input the motor will rotates clockwise, low level input or when F/R and COM are short circuit, the motor rotate anticlockwise
High level input the motor stops, low level input or when EN and COM are short circuit, the motor runs
The motor brake stops when a high level is added or port suspension; the motor runs when the low level is added or EN and BRK are connected
The default output signal is 5V under normal circumstances; the level is 0V when malfunction occurs
Output pulse frequency signal(OC). The motor speed can be calculated through SPEED.
Four speed regulation modes
Build-in potentiometer RV
Rotate the RV knob clockwise, the motor starts to run and accelerate. Motor speed will decrease if anticlockwise.
When it gets to a limited position, the motor stops.
Use a suitable potentiometer with a resistance value of 10KΩ, connect middle terminal with SV terminal, and the other two terminals are respectively connected with VCC terminal and COM terminal.
Input analog signal (0-5V)
Voltage and motor speed relational diagram(unloaded)
Pulse Width Modulation
Duty radio and motor speed relatoinal diagram (unloaded)
BRK and COM are connected in default, the motor will be quick brake, When BRK and COM are disconnected, the motor will rotate.
Connect F/R and COM, the motor will rotate clockwise, disconnect it, the motor will rotate anticlockwise.
Peaking current setting
Equipped with a motor protection function, the driver provides options to set desired current number in the P-sv ,knob to avoid over-current for motor. Please note that the random error is ±10% . The setting should be matched with motor rated current.
YOU MAY ALSO LIKE
BLDC 24V Brushless DC Motor Driver BLD-120A 12-30VDC 120W $27.00 $24.00 / piece11%OFF
NEMA23 hollow shaft stepper motor rotary index unit $158.00 $155.00 / unit2%OFF
2-phase Stepper Motor Driver Digital Type DM860 DC24-80V AC18-50V 5.6A $30.00 $29.00 / piece3%OFF
220v AC BLDC motor dirver for 310VDC high voltage motor $76.50 / unit
3D Printer NEMA17 Stepper Motor $8.50 $5.90 / unit31%OFF
42 stepper motor NEMA 17 34mm, 40mm, 48mm body length $8.90 $6.10 / unit31%OFF
42mm 42BLS brushless DC motor 4000mm rpm 24VDC $16.70 $15.60 / unit7%OFF
- All Products
- New Arrival
- About US
- Contact Us
- Track Order
Your cart is currently empty.