2-phase Stepper Motor Driver Digital Type DM860 DC24-80V AC18-50V 5.6A

DM556 2-phase Digital Stepper Motor Driver 36-60 VDC 2.1A to 5.6A for NEMA 23/34 stepper motor

DM860H stepper driver
1. power supply voltage DC24-80V or AC18-50V
2. drive current 2.4-7.2A
3. subdivision intensive reading 2-200 subdivision options
4. optical isolation signal input
5. motor noise optimization function
6. can drive any two phase, four phase hybrid stepper motor of below 2.0A phase current
7.20KHz chopper frequency
Electrical characteristics
Input power: 24-80v, DC power supply, capacity: not less than 200VA. typical value: DC36V
Input current: 2.4A-7.2A, 8 adjustable, resolution 0.5A
Drive mode: double machine constant current PWM drive input
Insulation resistance: >500M Omega at normal temperature
Insulation strength: 500V/ minutes at normal temperature
Weight: about 400 grams
Environmental requirements
Cooling mode: natural cooling
Use occasions: avoid dust, oil mist and corrosive gases.
Ambient temperature: 0 C -+50 C
Environmental humidity: <80%RH, no condensation, no frost
Vibration: maximum no more than 5.7m/s2
Driver input signal interface function
Signal interface
Signal pretext
PLS+ and PLS- control the positive and negative end of the pulse signal. DIR+ and DIR- are the positive and negative ends of the direction signal. 24V needs 2K resistor